POP AND DROP

These Midcap Bands are swappable color pops compatible with your Loam Dropper Post.

Lifetime Warranty

We've always got
your back

Fast Shipping Options

Get your parts for the
weekend ride

Unparalleled Service

Seriously, we're here
for you

Pacific NW Approved

All Season reliability, tested in the mountains

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

Specs: LOAM DROPPER MIDCAP BAND

sizes

30.9/31.6 compatible, 34.9 compatible

compatibility

These bands are only compatible with our Loam Dropper Post.

Installation

Keep It Simple

There are two things to keep in mind when installing the silicon band:

  1. There is a top and bottom for the band, the bottom edge is slightly tapered to match the contour of the midcap while the top edge is square.
  2. The band can be seated in place by simply wrapping your hand around and squeezing it into the channel.

Warranty

PNW Lifetime Warranty

Do we have your back? Of course. If anything goes wrong, we're here to do everything we can to ensure you're taken care of.

Learn More

Gallery